First, High-power Heating Faster, Full Effect of Better Atomization, More Savings in Construction

New headlights refurbished heating cup three perfect upgrade Repairing defects such as scratches, scratches, yellowing, aging, blurring, cracking, etc. on plastic headlights First, high-power heating faster, full effect of better atomization, more savings in construction time and liquid. Second, the perfect upgrade the heating cup base, the original use of the thread base after the upgrade to highlight the professional products, so that your product more competitive advantage. Third, the original ordinary low-end polished liner upgrade to high-end electrolytic liner, after upgrading both to enhance the quality of the product and grade and enhanced electrolytic atomization effect. Function: headlight repair tool atomization cup Model: NC-118 Rated voltage: 12V Input power: 60W Capacity: 500ML Description of operation steps (1) Grinding is done with 320#-600#-1000# sandpaper and water until the water is milky white. Then use 2000# sandpaper and water to polish until the surface is smooth and clean. (2) Open the bottle,Pour in atomized liquid.(liquid not Include) (3) Connect the spray tube to connect the vehicle or household power supply. (4)After atomization coating is energized for 2 minutes, the spray port is 1 centimeters away from the lamp surface. When operating, the brightness can be plated. Do not coat the same place for a long time, so as not to affect the drying speed. Attention OPERATION STEPS

1. It should be completely polished off the original coating on the lamp surface, not polished completely on the lamp surface can not be coated. 2. When operating, the tank can not be tilted to more than 75 degrees. And prevent fog from dropping. (This model is equipped with an anti-drip head to reduce the chance of this phenomenon.) 3. When the ambient temperature is below 20 ~C, heating the lamp to 50 ~C with a baking lamp or a hairdryer, or heating the lamp for 10 minutes before coating 4. When the coating solution is used up, please disconnect the power supply . 5. Please wear protective glasses mask for good ventilation. If the film is splashed into the eyes, rinse immediately with plenty of water. If you accidentally inhaled steam, please move to the fresh air quickly and keep the airway open.

Package include : 1x Atomized cup 3x Cover 1x Cigarette lighter NOTE: 1.This product does not contain cleaning yellowing marks are used to the coating solution 2.If you need a separate adapter, atomized liquid, please contact us.