BMW 397 Anthrazit car paint spray 400ml

• Capacity: 400 ml

• Base: acrylic resin

• Yield for a 400 ml can: from 1.25-1.75 m2

• Non-adhesive: from 5 to 10 minutes

• Drying time: from 10 to 20 minutes

• Hard/ready to coat: after approx. 2 hours

• High temperature resistance: up to 110 degrees Celsius

Drying time depends on, among other things, the ambient temperature, air humidity and the density of the varnish used

STEP BY STEP INSTRUCTIONS

1. The surface must be thoroughly cleaned and degreased. Fill gaps, scratches, and irregularities with putty, then smooth the repaired surface with 400-grit dry sandpaper. Then apply several thin layers of primer.

2. 2 hours at 20 degrees Celsius). Then smooth with 800-grit wet sandpaper.

3. The repaired element should be cleaned and degreased again. Please remember to leave a few minutes between each coat.

4. About 30 minutes after applying the last layer of basecoat, apply several layers of clearcoat to the repaired area. Finally, you can remove the masking elements. After 24 hours and complete drying, the surface is ready for polishing.

• Base Coat

NAME: ANTHRAZIT MET.