Professional Engine Controller Panel Set, Generator Controller Module ing Shower System with Temperature Sensor for Home Sauna Bath

APPLICATION: The professional engine controller panel is a device for monitoring and regulating the operating status of engines. TEMPERATURE DISPLAY: The engine controller panel has a temperature display that shows the operating temperature of the engine to within safe limits. SIMPLE : The engine controller panel allows the operator to easily view and control the of the engine to that it is working safely and efficiently. Item Type:   Engine Controller Panel Set Material: Plastic. Stainless Steel Weight: Approx. 463gCelsius16.3oz Voltage: 220V Power: 3-24KW Size: Approx. 115 3mm Celsius 4.53x4.06in Applicable Scene: Room Applicable Equipment: Generator, Machine Control Time Range(Min): 1～60 or Term Display Temperature Range: 6～60 celsius (43 Fahrenheit ～140 Fahrenheit ) Control Temperature Range:35～55 celsius (95～131 Fahrenheit ) Key Function and ON OFF: Control system ON OFF button. Press “ON OFF key to turn on the system, the system will open the solenoid valve and start to feed water, when the water reaches the required , the system will start to heat (current temperature). When the water reaches the required , the system heating starts (when the current temperature meets the conditions), until the water reaches the high water when the solenoid valve closes and stops feeding water, the system enters the Automatic work state, that is, according to the last set temperature and working time to start working automatically, or according to the default set temperature and working time to start The system will start working automatically according to the last set temperature and working time, or start working according to the default set temperature and working time (restarting when the system is powered down) until it needs to be reset. Press the “ON OFF key again, the system will be shut down manually and enter into the auto drainage state. Press “ON OFF key again, the system will be manually shut down and enter into automatic drainage, and shut down after the drainage is finished. SET: Temperature and time setting key. The first time you press this key to set the temperature, at this time the digital tube and the left red LED are flashing to show the previous set temperature. When the system is restarted after power down, the default setting temperature of 43 celsius (109 Fahrenheit ) will be displayed, then press “△ or “▽ to set the temperature. Then press “△ or “▽ key to rise or fall to the desired temperature, then press “SET key to confirm and enter into the time setting, the system has set working time and no working time. The system has two modes of setting the working time and not setting the working time (i.e. term work), at this time, the digital tube and the red LED on the right side are blinking. At this time, the digital tube and the red LED on the right side are flashing to show the set time in front or the default setting time of the system, which is 45 minutes (restarting after power down), or the countdown time left for the system to work. (when you need to extend the setting time during ), then press “△ or “▽ key to increase or decrease the time to the desired length, or Press “△ key until the digital tube blinks to show “CH , and then press “SET key to confirm, then the digital tube resumes to show the current temperature, if not confirmed, it will take 3 seconds. If it is not confirmed, it will be confirmed automatically after 3 seconds and the digital tube will resume displaying the current temperature, after which the system will start counting down or working for a time. After that, the system will start countdown or time work. The temperature setting range of the system is from 35 celsius to 55 celsius , and the default setting temperature of the system is 43