PD 22.5W Fast Charging Power Bank Motherboard with 0.96" Inch TFT Color Digital Display Support PD/QC/VOOC Electronic Kit

Quantity : 1 High-concerned chemical : none Package : TQFP is_d : Yes Dissipation Power : As Description Supply Voltage : As Description Application : MOBILE PHONE Type : Module Brand Name : DIY NOW Origin : Mainland China Condition : New Operating Temperature : As Description Condition : New Type : PD 22.5W Charger Module Key Word : Charger Module Dropship : Support

PD 22.5W Fast Charging Power Bank Motherboard with 0.96" Inch TFT Color Digital Display Support PD/QC/VOOC Electronic Kit Features: 1. Equipped with a TFT intelligent digital color display, the remaining battery level is clearly displayed. 2. Supports 22.5W SuperCharge, compatible with PD/QC/VOOC multi-protocol fast charging. 3. Dual-port design: Type-C + USB, allowing for simultaneous charging of multiple devices. 4. Built-in multiple safety protections: comprehensive protection against overvoltage, overheating, overcharge and overdischarge. 5. High-conversion circuit design: low power loss, efficient and stable charging.

Product Parameters: Product Name: Power Bank Kit Input Parameters: 5V3A/9V2A/12V1.5A Output Parameters: 5V3A/9V2A/12V1.5A/10V2.25A Display: 0.96-inch TFT color screen Interfaces: 1 Type C fast charging port (for both charging and output) + 1 USB fast charging output port Battery compatibility: Accepts 2 21700 batteries; soldering required (batteries not included). Functionality: The motherboard is fully protected, with multiple protections including overcharge, over-discharge, overvoltage, and overheating. High conversion rate and stable current and voltage. Note: 22.5W is the SuperCharge protocol, VOOC Flash Charge, and two-way fast charging is the PD20W protocol. Simultaneous output from multiple ports does not support fast charging.

Assembly Instructions: 1. Upon receiving the motherboard, connect the charging cable to the input and test the display. Verify that the display is illuminated before soldering. 2. For normal use, the battery leads are soldered in. Wiring with twist-ons, alligator clips, or spring-loaded connections can result in insufficient power and affect charging and discharging. Ensure the positive and negative battery terminals are insulated to prevent contact with the motherboard during use and damage. 3. Connect the B+ terminal on the motherboard to the positive terminal of the battery, and the B- terminal to the negative terminal. Do not connect them in reverse. This can burn the motherboard and leave marks on the IC. This only occurs if the connections are reversed or if they are in contact. 4. Use 3.7V lithium batteries; lithium iron phosphate batteries are not acceptable. Batteries should be soldered in parallel, not in series. Excessive voltage in series connection can damage the motherboard. 5. The motherboard has built-in protection features; soldered batteries do not require a protection board. The battery protection board limits the current and will disconnect the output if the limit is exceeded. 6. After installing the motherboard and battery, secure the battery with adhesive. If the thickness of some battery models differs from the outer casing, check to see if any spacers are needed to prevent the outer casing from collapsing when pressed after installation. Failure to check the thickness difference or to secure the battery with adhesive during assembly may result in battery wobbling or a sense of outer casing collapse. This is due to improper assembly. We are not responsible for any damage to the outer casing or battery caused by disassembly. 7. The outer casing is snap-on and cannot be reassembled. Please ensure that the motherboard's output, input, fast charging, buttons, and display are functioning properly before reinstalling the cover. It is best to test the motherboard's output, input, fast charging, buttons, and display to ensure they are functioning properly. It is best to perform several charge and discharge cycles to confirm that all functions are functioning properly before reinstalling the cover. If problems occur after assembling and closing the cover without testing, it is due to improper assembly. We are not responsible for any damage to the casing or battery caused by disassembly.

Instructions: 1. Regarding activating mobile phone fast charging, mobile phone fast charging protocols are divided into public and private protocols. This motherboard uses a smart fast charging chip that is compatible with mainstream public fast charging protocols and can meet the fast charging needs of different phone s. Before placing an order, please confirm whether your phone is compatible with the public protocol to avoid failure to trigger fast charging! 2. Regarding the motherboard heating during charging, when the power bank is operating, current passes through the motherboard and chip, and energy conversion will cause loss. This loss is dissipated as heat. During fast charging, the power is high and the heat is more noticeable. This is a normal physical phenomenon. 3. The digital power display will be inaccurate when the battery is first connected. The fuel gauge supports battery capacity self-learning function, which will return to normal after a few charge and discharge cycles.

Package List: Module x1 label:yes

Battery capacity: 43200 Charge indicator: No Number of ports: 1 port